木板表面絲印移印油墨 

1、油墨特性：UV光油表面絲印UV油墨，屬于紫外線光固UV型絲印油墨。

2、適用材料：五金表面噴過油漆，烤漆，手機、MP3、電腦、電子字典、電器按鍵、汽車配件等產品上有過UV涂層工序再進行移印或絲印工藝。

 

3、技術參數：

1、可以通過RCA紙帶300-400次左右（175G國標）。

2、強耐酒精測試，97%酒精度1500次。

3、橡皮磨擦5000次不露低，5000次不劃傷。

4、強耐人工手汗測試固化:一般使用2000W-3000W的紫外光射，光管高度10com,有效過光距離1米，速度15秒/米，如果墨層太厚影 將響固化速度和附著力    

 

 

4、應急處理措施：

 

      a、如浸濺到眼部立即清水清洗，嚴重者就醫。

 

b、滅火急救措施：用干粉，泡沫滅火器或沙子滅火。

 

 

 

 

※備注：由于材料及使用中的變數，可能是結果會有變化，以上數據僅供參考，使用前請自行測試。

 

1, ink characteristics: UV light oil surface screen printing UV ink, UV light solid UV screen ink.
2, applicable materials: metal surface sprayed paint, baking paint, mobile phones, MP3, computers, electronic dictionaries, electrical buttons, auto parts and other products have UV coating process, then proceed with pad printing or screen printing process.

3. Technical parameters:

1, can pass the RCA paper tape about 300-400 times (175G national standard).

2. Strong alcohol tolerance test, 97% alcohol degree 1500 times.

3, rubber friction 5000 times do not expose low, 5000 times do not scratch.

4, strong resistance to artificial hand sweat test curing: generally use 2000W-3000W UV light, light tube height 10com, effective light distance of 1 meters, speed 15 seconds / m, if the ink layer is too thick, it will speed and adhesion speed.


4. Emergency treatment measures:

A, if soaked to the eye immediately clean water, serious medical treatment.

B, fire extinguishing measures: use dry powder, foam extinguisher or sand to extinguish fire.




Please note: due to the material and the use of variables that may be the result of a change, the above data for reference only, please test before use.[本信息來自于今日推薦網]