BPI認證要求 

    概述:[中介]Requirements of BPI approval

    刷新時間:
    2025-04-07 10:34:02 點擊73440次
    聯系電話:
    0592-5522220 黃先生
    QQ:
    2561698119
    信用:4.0  隱性收費:4.0
    描述:4.0  產品質量:4.0
    物流:4.0  服務態度:4.0
    默認4分 我要打分

       Requirements of BPI approval

    1)  Formulation and Material Characteristics
    a) Full formulation disclosure of each constituent >0.1% including its associated dry weight percent and supplier information, CAS#’s and Material Safety Data Sheets (MSDS). The overall formulation percentage should equal 100. Carcinogens, reproductive toxins, or environmentally dangerous chemicals (PBT substances) are not permitted to be present in the formulation. Any external additive such as inks, coatings, lacquers and adhesives must be included in the formulation information.
    b) Description of the Product(s) including a list of specific brand names and item numbers (also known as stock keeping units or SKU under which the product is identified to customers and in the market. For resins, intended end use(s) and manufacturing processes (injection, extrusion, thermoform, foodservice, film bags, laminations etc.)
    c) Maximum thickness                                                                                                                                     
    d) Maximum density (required for bagasse, molded pulp and paper products)
    e) Din Certco or Vincotte certificates, if applicable
     
     

    2)  Test Data to demonstrate compliance with ASTM D6400 or ASTM D6868
    a) Biodegradation (Test data may not be older than two (2) years)                                              
      i) ­­­Biodegradation of the substrate  by at least one of the following:                                   
    (1) Provide evidence of biodegradation of the substrate through the use of a Licensor Certified Product.
    (2) Provide evidence of biodegradation of the substrate through testing performed by an  Approved Testing Laboratory according to ASTM D5338 or an equivalent method (i.e. ISO 14855)
    (3) Provide evidence of >95% biobased carbon content according to ASTM D6866 for unmodified materials of natural origin or paper
    (4) Provide evidence of biodegradation of the substrate through scientific literature and/or research studies.
      ii) Biodegradation of individual organic additives present in concentrations 1-10%, including, pigments, inks,  colorants, scents, secondary polymers, glues, etc., by at least one of the following:
    (1) Provide evidence of biodegradation of an additive through the use of a Licensor Certified Product.
    (2) Provide evidence of biodegradation of the additive through testing performed by an Approved Testing Laboratory according to ASTM D5338, ISO 14855, ISO 14851 or ISO 14852. 
    (3) Provide evidence of biodegradation of the additive through scientific literature and/or research studies
    b) Disintegration of the Final Product (Test Data must not be older than (2) years)               
    i) Quantitative disintegration of the final product at its maximum thickness and/or density, conducted by an Approved Testing Laboratory according to methods accepted in the most recent versions or ASTM D6400 or ASTM D6868 standard specifications.
    c) Ecotoxicity / Phytotoxicity (Test Data must not be older than two (2) years)                       
    i) Ecotoxicity should be performed according to OECD 208 after a successful disintegration test which was performed on the final product
    ii) Must include the germination rate and biomass results for two plant species
    iii) Ecotoxicity of additives > 0.1% must show proof that they are non-toxic 
    d) Regulated Metals Content (Test data must not be older than one (1) year)                        
    i) To be performed on the final product
    (1) Zinc, copper, nickel, cadmium, lead, mercury, chromium, molybdenum, selenium, arsenic and cobalt,
    (2) To be performed by an  Approved Testing Laboratory or ISO 17025 accredited laboratory for this specific method
    e) Ash Content - Volatile Solids Content (Test data must not be older than one (1) year)   
    i) To be performed on the final product
    (1) To be performed by an  Approved Testing Laboratory or ISO 17025 accredited laboratory for this specific method
    f) ATR or FTIR (Test data must not be older than one(1) year)                                                       
    i) To be performed on the final product / product layers
    (1) To be performed by an Approved Testing Laboratory or ISO 17025 accredited laboratory for this specific method.

    [本信息來自于今日推薦網]
    • xmcert發布的信息
    • OK Compost認證
    • [中介]From the Belgian head office in Vilvoorde, and from the 13 other establishments throughout the world, more than 2,500 employees serve in excess of 15,000 industrial customers....
    • GreenPla認證
    • [中介]Former Biodegradable Plastics Society, Japan has changed the name to Japan BioPlastics Association on 15th of June 2007....
    • DIN Certco認證
    • [中介]DIN CERTCO operates a certification scheme for compostable products made of biodegradable materials and licenses the use of the corresponding Mark developed by European Bioplastics...
    • BNQ認證
    • [中介]加拿大BNQ認證...
    • AS 4736認證和檢測
    • [中介]AS4736 AS5810 ASTM E1676...
    • ABA認證或Seedling license認證
    • [中介]ABA認證(Seedling logo):AS4736 AS5810 ASTM E1676檢測和認證...
    主站蜘蛛池模板: 草莓视频成人appios| 成人草莓视频在线观看| 亚洲人成人一区二区三区| 国产成人免费永久播放视频平台| 免费成人一级片| 成人浮力影院免费看| 国产精品成人不卡在线观看| 亚洲精品国产成人| 成人性生交大片免费看| 亚洲精品成人网站在线播放 | 中文字幕人成人乱码亚洲电影| 欧洲成人全免费视频网站| 国产成人刺激视频在线观看| 88aa四虎影成人精品| 国产成人精品cao在线| 成人妇女免费播放久久久| 91精品欧美成人| 国产成人精品日本亚洲专区6| 精品免费久久久久久成人影院| 国产成人av在线影院| 国产成人精品午夜二三区波多野 | 中文字幕成人免费高清在线视频| 国产成人精品高清在线观看99| 2022国产成人福利精品视频 | 天天欲色成人综合网站| 欧美成人观看免费完全| 俄罗斯一级成人毛片| 国产成人亚洲综合| 国产成人无码午夜视频在线观看| 成人综合伊人五月婷久久| 色噜噜成人综合网站| 色偷偷成人网免费视频男人的天堂 | 国产成人h在线视频| 国产成人精品无码播放| 国产成人综合久久精品亚洲| 成人浮力影院免费看| 成人免费无毒在线观看网站| 成人午夜小视频| 成人五级毛片免费播放| 成人免费视频网站www| 成人免费无毒在线观看网站|